ATK Sand Filter is made of fiberglass-reinforced polyester with an arms collector system, the multiport valve on the top or at the side on demand. Designed for filter flow rate from 6.5 to 282 m³/h, filter bed height of 12m (single or multiplayer beds).
Good quality, high performance
Corrosion resistance, long service life
Can be produced according to customers requests
ATK sand Filter is made from fiberglass-reinforced polyester with arm collector system, the multiport valve on the top or at the side, and for bigger filters(over 1200mm), with a 5 valve battery at the side. It is equipped with a pressure gauge and produced for pressures up to 25 bar, Higher pressures are possible on demand. Designed for filter velocities from 6.5 to 282 m³/h, filter bed height of 12m (single or multiplayer beds).
The main function of sand filter is filtered floating debris of pool ,and make clean water is back into the pool again.The media is Quartz sand, filter procedure: First, Push the handle to location which mark "filter" to head , and then start the pump, water is introduced through the pump to inlet of filter ,then from inlet flow to manifold, then into the sand filter , water flows into the filter through the bottom of the filter sand layer , and then from filter tube into main tube ,water in the pipe flow to the outlet, and finally injection into the poolApplication:
Swimming pools, wave pools, water parks, or seafood ponds in big restaurants
Water recirculation aquariums and aquaculture
Industrial system for water